Horizontally mount onto flat surface using bolts or 3M tape depending on which product choice, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Horizontally mount onto flat surface using bolts or 3M tape depending on which product choice, run wire through hole in fixing surface. Please refer to ADR 13/00 for mounting instructions.
Fit into cutout (cutout 115mm round) using stick on gasket between lamp and fitting surface, run wires at back. Please refer to ADR 13/00 for mounting instructions.
Technical Drawings
110 series lamps are fully submersible, shock resistant and feature a hexagonal lens pattern. These lamps retro fit to same shape designs.Plug (53102), grommet (53101) or bracket (53101B or 53101C) required if new installation.
Warranty Information
5 Year Warranty
12/24V CHROME SURFACE MOUNT BRACKET 58MM X 35MM X 21MM
Surface mount bracket, run wires through back
and clip lens into place. Please refer to
ADR 13/00 for mounting instructions.
Twin Headlight Relay Fused Genuine New Era Twin Fused – Made In Japan
Twin Headlight Relay
with individual fuse holders
Twin Headlight Relay Fused Genuine New Era made in Japan Description – Genuine New Era Twin Headlight Relay, ideal for older vehicles without factory headlight relays.
Headlights dim? Voltage drop problems? The answer is a twin headlight relay. Simple to wire and with built in fuses, this twin headlight relay will ensure maximum voltage to your lights, and therefore maximum light output!
2 x 30amp Circuits – High and Low Beam
Continuous Duty with Silver Tin based Contacts
2 x 30amp Standard Blade Fuses included
Sealed Unit
REAR END OUTLINE MARKER LED LAMP 10-30V NARVA 90832BL
90832
10-30 Volt L.E.D Rear End Outline Marker Lamp (Red) with Grey Deflector Base and 0.5m Cable
Comprises: 90830 1 x 10-30V L.E.D lamp with 0.5m cable 90890 1 x grey deflector mounting base
SIDE INDICATOR 12V SEALED BEAM MODEL 15 NARVA 91500
