South Coast Truck Sales & Spares Shop Electrical Projecta Dual Battery SystemsPROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP

Save $30

PROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP

Name: PROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP
SKU: DBC150K
Price: 335.00 AUD
Availability: InStock

$335.00

Add to wishlist

SKU: DBC150K Categories: Dual Battery Systems, Projecta

PROJECTA

Description

12V 150A Electronic Isolator Kit
A fully automatic dual battery kit ideal for use on large 4WD vehicles wishing to run double or triple battery systems.

SPECIFICATIONS

Product details		MOUNTING	Surface/firewall/battery side
PART NO.	DBC150K	CURRENT DRAW	Charging 500mA (standby 30mA)
VOLTAGE	12V	SURGE PROTECTION	Built-in
CHARGING CURRENT	125A Continuous, 150A Peak	APPROVALS	EMC
CUT-IN VOLTAGE	13.4V	L.E.D CHARGE INDICATION
CUT-OUT VOLTAGE	12.8V		ON	FLASH
CUT-OUT DELAY	60 seconds	RED LIGHT	Power on	Aux battery fault
Minimum operating Voltage	One battery above 7.5V	BLUE LIGHT	Charging	Over-current
CHARGE TYPE	Parallel	GREEN LIGHT	Override on	Over-current
CONTROL	MCU	GREEN LIGHT	Override on	Over-current

KIT COMPRISES		DOCUMENTS
• Electronic isolator (150A: P/No. DBC150) • 6m main cable (4 B&S) & 60cm aux earth cable (3 B&S) • Fused distribution terminal, fuses, lugs, heat shrink & cable ties

Brand

PROJECTA

Additional information

Weight	2.7 kg

Street Address

Suburb

Country

State

Postcode

Quantity

Shipping to	Please provide the delivery address details.
Product	PROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP
Total weight	1 × 2.70 kg = 2.70 kg
Price	-

Quick Comparison

Settings PROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP remove INVERTER 600W POWER 12V DC 230 AC PROJECTA IMW600 remove BATTERY POWER STATION PROJECTA BPE330 remove BATTERY TESTER CURRENT DIGITAL CLAMP METERPROJECTA DT910 remove INVERTER 12V 2000W PURE SINE WAVE PROJECTA IP2000 remove PROJECTA IMW300 INVERTER 12V 300W remove

Image

SKU DBC150K IMW600 BPE330 DT910 IP2000 IMW300

Rating

Price $304.55 $159.09 $64.55 $140.91 $1,700.00 $100.00

Stock

4 in stock

2 in stock

1 in stock

Availability 4 in stock 2 in stock 2 in stock 2 in stock 1 in stock 1 in stock

Add to cart

Description

Content

12V 150A Electronic Isolator Kit
A fully automatic dual battery kit ideal for use on large 4WD vehicles wishing to run double or triple battery systems.

SPECIFICATIONS

Product details		MOUNTING	Surface/firewall/battery side
PART NO.	DBC150K	CURRENT DRAW	Charging 500mA (standby 30mA)
VOLTAGE	12V	SURGE PROTECTION	Built-in
CHARGING CURRENT	125A Continuous, 150A Peak	APPROVALS	EMC
CUT-IN VOLTAGE	13.4V	L.E.D CHARGE INDICATION
CUT-OUT VOLTAGE	12.8V		ON	FLASH
CUT-OUT DELAY	60 seconds	RED LIGHT	Power on	Aux battery fault
Minimum operating Voltage	One battery above 7.5V	BLUE LIGHT	Charging	Over-current
CHARGE TYPE	Parallel	GREEN LIGHT	Override on	Over-current
CONTROL	MCU	GREEN LIGHT	Override on	Over-current

KIT COMPRISES		DOCUMENTS
• Electronic isolator (150A: P/No. DBC150) • 6m main cable (4 B&S) & 60cm aux earth cable (3 B&S) • Fused distribution terminal, fuses, lugs, heat shrink & cable ties

INVERTER 600W POWER 12V DC 230 AC PROJECTA IMW600

Projecta’s BPE330 turns an ordinary battery into a convenient and user friendly power station.

Simply fit your own battery into the pre-wired box and you are ready to go.

SPECIFICATIONS

PRODUCT DETAILS		RECOMMENDED CHARGER
PART NO.	BPE330	240V	P/No. IC1000
SUITS	N70Z size batteries	SOLAR	P/No. SPP80K
INTERNAL SIZE	H: 200mm W: 190mm L: 330mm	12V	P/No. DC20
EXTERNAL SIZE	H: 280mm W: 220mm L: 390mm
MATERIAL	Polypropylene
ACCESSORY SOCKET	20A circuit breaker
CIGARETTE SOCKET	10A circuit breaker

PROJECTA DT910 BATTERY TESTER CURRENT DIGITAL CLAMP METER

SPECIFICATIONS

PRODUCT DETAILS		DIODE TEST	Screen display forward Voltage drop
PART NO.	DT910	FREQUENCY	0–1 MHz
RANGE	Auto scale	DUTY CYCLE	1–99%
POLARITY	Auto indication (-)	ACCURACY	< ± 1.0% full scale reading
VOLTAGE	DCV 600V; ACV 600V	BATTERY	1.5V dry cell (AAA x 2)
CURRENT	DCA 400A; ACA 400A	LOW BATTERY WARNING	2.3V
MAXIMUM CONDUCTOR SIZE	Cable 38mm diameter Bus bar 41mm x 30mm	INSULATION	CAT II
RESISTANCE	0–4 MOhm	SIZE	219mm x 84mm x 42mm
CONTINUITY	Buzzer	WEIGHT	540g
TEMPERATURE MEASUREMENT	0^oC - 250^oC (300^oC for short periods)	CAPACITANCE	5nf - 200µF
NON-CONTACT VOLTAGE DETECTION	240V AC

Projecta’s most powerful 12V pure sine wave inverter, the IP2000 offers all the class leading

features of the Intelli-Wave range with the added benefits of a sophisticated AC transfer switch,

ultra clean power delivery and rugged construction.

Closely replicating mains power the 2000 Watt Pure Sine Wave Inverter includes a built in automatic AC

transfer switch allowing appliances to be powered from either mains power or the inverter (battery power).

Such an AC transfer makes it ideal for permanent installation in caravans, motor homes and work

vehicles with minimal disruption when switching between mains and battery power and vice versa.

The IP2000 quickly adjusts to high start-up loads from appliances such as fridges,

air compressors or any motor driven units, to deliver 140% of rating for 3 minutes or 200% for

3 seconds. It will indicate an overload when this occurs but will keep running, allowing time

to turn off appliances rather than the inverter just tripping out.

A remote LCD control panel which displays battery voltage, power usage and load capacity allows

the inverter to be mounted out of sight whilst still having full control and access to vital information.

A built in Eco mode automatically sends the inverter to ‘sleep’ mode when no appliances are detected.

It automatically wakes up when an appliance is switched on and it can also be manually woken up via the

inverter or the remote control panel reducing standby power consumption. There are 30sec.

1 hour, 3 hour or off modes.

The IP2000 can be hardwired to power sockets through the vehicle eliminating the need for

both mains and inverter power points and the need to manually switch plugs or dials between two power sources.

Engineered and designed in Australia to meet AS/NZ Standard AS4763 the inverter is equipped

with fully approved 240V sockets and comes complete with 1100mm battery cable with battery lugs.

This powerful and sophisticated inverter with an output of 240V AC 50Hz 2000W

continuous (4000W peak) carries a 2 year warranty.

PROJECTA IMW300 INVERTER 12V 300W

12V 300W MODIFIED SINE WAVE INVERTER

PART NO IMW300

If you’re after the convenience of 240V power while camping, then the IM300 inverter is ideal.

FEATURES

Battery clips
900mm heavy duty battery cable with fitted battery clips for convenient connection

Approved output socket
AS/NZS approved 240V socket. Inverter designed to Australian standard AS4763

L.E.D indicators
Power and fault lights with audible alarm if problem is detected

Efficient design
Cooling fan to prevent overheating

> Range features and application guide

SPECIFICATIONS
PART NO	IMW300
INPUT	12V DC, 30A Max
NO LOAD CURRENT DRAW	0.57A
OUTPUT	230/240VAC, 50Hz (Modified Sine)
OUTPUT POWER	300W Continuous (600W Peak)
INVERTER CLASSIFICATION	Equipotentially Bonded (EPB)
EFFICIENCY	85–90%
LOW BATTERY ALARM	10.5 Volt
SHUTDOWN	10.0 Volt (±0.2V)
COOLING FAN	Constant run
THERMAL SHUTDOWN	65°C (±5°C)
FUSE	1 x 40A
IDEAL BATTERY SIZE	50–70Ah
MINIMUM BATTERY SIZE	24Ah, 200CCA
RUN TIME WITH 300W ON 24Ah BATTERY	40 minutes
RUN TIME WITH 100W GLOBE ON 24Ah BATTERY	2 hours
WARNING ALARM	LED & Audible alarm indicates a fault
APPROVALS	Electrical Safety, EMC

INSTRUCTION MANUAL

> Download PDF

Weight 2.7 3.0 2.0 0.4 10.0 1.2

Dimensions N/A N/A N/A N/A N/A N/A

Additional information

Weight	2.7 kg

Weight	3.0 kg

Weight	2.0 kg

Weight	0.4 kg

Weight	10.0 kg

Weight	1.2 kg

Choose Language

Cart

PROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP

Description