Medium trailers, Medium Campers, Boat trailer. (8×5 Tradie* *)
Caravans & Large trailers. (10×6, Car Trailer, Heavy Haulage)
Suits Braking System
Non braked
Over run Hydraulic & Over run Mechanical
Electric & Power assisted
Mounting Pattern (hole centres)
2 bolt – 102mm
3 bolt – 111m x 51mm
4 bolt – 184mm x 54mm
4 bolt – 182.5mm x 55mm
Bolt Hole Size
13.5mm
13.5mm
13.5mm
Recommended Bolt Size
10mm
12mm
12mm
Recommended Bolt Grade
Grade A4-80
Grade A4-80
Grade A4-80
Supporting Products
3/4″ Hydraulic conversion plate 610943
7/8″ Hydraulic converse plate 610944
Mechanical conversion plate 614053
*ATM = Aggregate Trailer Mass.
**6×4, 7×4, 8×5 & 10×6 referrers to typical box trailer body construction sizes
Note: For Imperial bolt sizes or socket head cap screws must be equivalent or higher strength than those listed above. Please check with your bolt supplier for availability and suitability.
Coupling Mounting tightening torques of all fasteners 00Nm.
Due to the often harsh vibrations sustained at axle mounts, AL-KO recommends the use of anti-loose or nyloc nuts.
*ATM = Aggregate Trailer Mass.**6×4, 7×4, 8×5 & 10×6 referrers to typical box trailer body construction sizesNote: For Imperial bolt sizes or socket head cap screws must be equivalent or higher strength than those listed above. Please check with your bolt supplier for availability and suitability.
Coupling Mounting tightening torques of all fasteners 00Nm.
Due to the often harsh vibrations sustained at axle mounts, AL-KO recommends the use of anti-loose or nyloc nuts.
CORNER STEADY DROP DOWN 740MM WITH BIG FOOT ALKO 654874
A level van makes all the difference when camping and these AL-KO Corner Steadies have been doing so for years with their sturdy & user-friendly design that have won over allot of local caravan manufacturers since. These steadies are the premium choice and a standard attachment on late model off-road vans and feature a quick release handle to drop down the leg and the same standard 17-mm hex drive for smooth height adjustments up to 740 mm. The advantage of this is they take up less room under your chassis when folded compare to conventional stabiliser and to offer further convenience they are removable from their brackets if you ever need to change them out quickly in the future eliminating the need for welding. Lastly, they will handle any site as this premium drop down steady includes AL-KO’s Bigfoot System for supreme stability whether the ground is hard of soft ensuring you stay level for long as you decide to stay.
Being an AL-KO product the usual quality is there with it’s all steel construction and zinc plating it will be in service for many years to come.
Specifications
- Genuine AL-KO Part 654874
- Extended Height Suitable for Off-Road Vans as a Corner Support
- Includes AL-KO Bigfoot Support Pad for Extra Stability on Soft Ground
- 740 mm of Adjustable Height with the Leg Fully Extended
- 500 mm Minimum Height when Leg is Dropped Down
- Leg Will Operated in Various Angles Allowing for Various Height Options
- Stowed Height of Leg is 125 mm
- Mounting Bracket is Included for Chassis Installation.
- Bolt on Installation for Legs to Mounting Bracket for Quick Changeover (Two Bolt Hole 80 mm Centres – Leg Top Section Measures L 100 mm x W 65 mm)
- All Steel Construction with Zinc Plating for Durability
- 17-mm Standard Hex Wind Nut
- Features Smooth Grip Handle for Comfort
- Comprehensive Range of Genuine Spares Available from AL-KO
Tips
Steadies are generally a standard item found under your van as you always rely on them to keep your van supported when stationary. With these longer AL-KO premium ones they are normally found on most later model off-road vans as they are packed with many useful features but they can also be retro fitted to any high clearance trailer, I particularly like the attached Bigfoot pad as your van doesn’t seep into the soft ground after you’ve just stepped into it from only just getting it levelled prior.
For longevity, it is important to remember that any corner steadies are just purely supports and not to be used as jacks for levelling your van as this should be done with ramps and your jockey wheel. If these stabilisers are used as “recommended supports” combined with a little bit of TLC by keeping the winding thread greased, they will last you a fair while with many years of steady service.
TOW BALL MOUNT HITCH 50MM X 160MM & TOW BALL ARK TBH160D
160mm Tow Ball Mount with 50mm chrome tow ball
Ark’s range of tow ball mounts suit 50mm x 50mm hitch receivers, have a high quality black powder coat finish, a 3500kg maximum towing capacity** and all comply to AS4177.1-2004.
