Mon-Fri: 8am - 4pm, Sat: 8am - 12pm

Choose Language

South Coast Truck Sales & SparesShopElectricalProjectaJumpstartersJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
Save $48
JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

$250.00

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

Add to wishlist
SKU: IS1220 Categories: ,
PROJECTA

Description

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

INTELLI-START 12V 1200A LITHIUM EMERGENCY JUMP STARTER AND POWER BANK

PART NO IS1220

1200A PEAK AMPS, 400A CLAMP POWER

This powerful and compact lithium jump starter is capable of starting most petrol engines up to 7.0L* and diesel vehicles up to 4.5 litres.

OVERVIEW

  • Rapid Recharge Technology (RRT)
  • Lasts 4X longer* than other Jump Starters.
  • Ultra-safe Lithium Iron Phosphate (LiFePOâ‚„) battery
  • 90% lighter than equivalent lead acid Jump Starter
  • Built in L.E.D flood light
  • Power bank functionality

INSTRUCTIONAL MANUAL

> Download PDF

SPECIFICATIONS

PART NO

IS1220

APPLICATION

Emergency

OUTPUT

12V

EMERGENCY JUMPSTARTS
(With a flat vehicle battery)

68 (Petrol) 34 (Diesel)

SUITABLE FOR VEHICLES

Up to 7.0L petrol and up to 4.5L diesel

VEHICLE VOLTAGE RANGE

0 – 15.0V

USB OUTPUT

USB OUTPUT

2.1A, 5.0V

USB LOW VOLTAGE DISCONNECT

Battery voltage at 10.5

BATTERY

BATTERY CAPACITY

12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V

BATTERY CHEMISTRY

Lithium Iron Phosphate (LiFePO4)

THEORETICAL SHORT CIRUIT CURRENT

1200A

CLAMP OUTPUT

400A

TOTAL BATTERY CYCLES

1800

JUMP STARTER LEADS

LENGTH

Positive 31.0cm, negative 27.0cm

CABLE

8mm² 8(AWG)

POLARITY PROTECTION

MCU controlled with Electronic Switch Smart Module

RECHARGING

CABLE

1m long USB to Micro USB

MICRO USB CHARGING PORT

2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied)

12V DC CHARGING

12V to 5V 2.1Amp USB charger (provided)

RECHARGE TIME

8 hours

JUMP STARTER

WEIGHT

0.80 kg

DIMENSIONS

H: 50mm L: 197mm W: 95mm

OPERATING TEMPERATURE

-20°C to 60°C

STORAGE TEMPERATURE

-0°C to 45°C

INGRESS PROTECTION

IP53 (rain proof) with covers over the ports

Brand

PROJECTA

Additional information

Weight 1.50 kg
Shipping to Please provide the delivery address details.
Product JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
Total weight 1 × 1.50 kg = 1.50 kg
Price -

Quick Comparison

SettingsJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220 removeWORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20 removeBATTERY CHARGER 12V 7AMP INTELLI CHARGE 7 STAGE PROJECTA IC700W removePROJECTA DBC150K DUEL BATTERY SYSTEM 12V 150AMP removeBATTERY CHARGER 12V 16AMP 6 STAGE SWITCH MODE PROJECTOR PC1600 removeBATTERY TESTER CURRENT DIGITAL CLAMP METERPROJECTA DT910 remove
ImageJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
SKUIS1220HDBC20IC700WDBC150KPC1600DT910
Rating
Price $227.27 $636.36 $218.18 $304.55 $222.73 $140.91
Stock

6 in stock

Out of stock

1 in stock

4 in stock

1 in stock

2 in stock

Availability6 in stockOut of stock1 in stock4 in stock1 in stock2 in stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
ContentJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

INTELLI-START 12V 1200A LITHIUM EMERGENCY JUMP STARTER AND POWER BANK

PART NO IS1220 1200A PEAK AMPS, 400A CLAMP POWER This powerful and compact lithium jump starter is capable of starting most petrol engines up to 7.0L* and diesel vehicles up to 4.5 litres. OVERVIEW
  • Rapid Recharge Technology (RRT)
  • Lasts 4X longer* than other Jump Starters.
  • Ultra-safe Lithium Iron Phosphate (LiFePOâ‚„) battery
  • 90% lighter than equivalent lead acid Jump Starter
  • Built in L.E.D flood light
  • Power bank functionality
INSTRUCTIONAL MANUAL > Download PDF
SPECIFICATIONS

PART NO

IS1220

APPLICATION

Emergency

OUTPUT

12V

EMERGENCY JUMPSTARTS
(With a flat vehicle battery)

68 (Petrol) 34 (Diesel)

SUITABLE FOR VEHICLES

Up to 7.0L petrol and up to 4.5L diesel

VEHICLE VOLTAGE RANGE

0 – 15.0V

USB OUTPUT

USB OUTPUT

2.1A, 5.0V

USB LOW VOLTAGE DISCONNECT

Battery voltage at 10.5

BATTERY

BATTERY CAPACITY

12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V

BATTERY CHEMISTRY

Lithium Iron Phosphate (LiFePO4)

THEORETICAL SHORT CIRUIT CURRENT

1200A

CLAMP OUTPUT

400A

TOTAL BATTERY CYCLES

1800

JUMP STARTER LEADS

LENGTH

Positive 31.0cm, negative 27.0cm

CABLE

8mm² 8(AWG)

POLARITY PROTECTION

MCU controlled with Electronic Switch Smart Module

RECHARGING

CABLE

1m long USB to Micro USB

MICRO USB CHARGING PORT

2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied)

12V DC CHARGING

12V to 5V 2.1Amp USB charger (provided)

RECHARGE TIME

8 hours

JUMP STARTER

WEIGHT

0.80 kg

DIMENSIONS

H: 50mm L: 197mm W: 95mm

OPERATING TEMPERATURE

-20°C to 60°C

STORAGE TEMPERATURE

-0°C to 45°C

INGRESS PROTECTION

IP53 (rain proof) with covers over the ports

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

Multi Voltage Operation 
Suitable for charging 6, 12 or 24 Volt batteries. 
Manual Charge 
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge 
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. 
0-14 Hour Timer 
Automatically turns the battery charger off after set time. Can be set at 60 min intervals. 
Engine Start 
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display 
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. 
Thermal Overload/Polarity Protection 
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. 
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.

SPECIFICATIONS
PART NO. HDBC20
TYPE Manual and Automatic
INPUT 240V, 50Hz, 300W
OUTPUT 12,000mA (20A RMS*) at 6.0V, 
12,000mA (20A RMS*) at 12.0V, 
7,700mA (13A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off 
50A at 3.6V / 50A at 7.2V / 25A at 14.4V
CHARGE CONTROL  Cut out: 7.1V 14.2V 28.4V 
Cut in: 6.7V 13.4V 26.8V 
Start: 0.0V 0.0V 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON  Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON  Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE  CHARGE TIME 
AUTOMOTIVE 6, 12,24V 450-1200CCA 6-15 hrs
MARINE 6, 12,24V  600-1400MCA 8-18 hrs
DEEP CYCLE 6, 12,24V  65-160Ah  8-18 hrs

 

Type 7 stage
Input 240VAC, 50Hz, 216W
Output 7A at 12V
Minimum start voltage 2.5V
Back drain 1mA
Approvals Electrical Safety, EMC
Charge voltage 14.1V (GEL), 14.4V (AGM), 14.7V (WET), 16.0V (Calcium)

L.E.D Charge Indication
Red light on Power on
Blue light on Charging
Green light on Fully charged and maintaining, no need to turn the charger off

Battery Charge Times
Voltage Battery size Charge time
Automotive 12V 300-800CCA 6-12 hrs
Marine 12V 350-900MCA 8-15 hrs
Deep cycle 12V 50-140Ah 6-20 hrs

Offering all the features of its standard 7A counterpart, this sophisticated and compact charger is

supplied with protective rubber moulded end caps for enhanced durability, ideal for the rigours of workshop enviroments.

12V 150A Electronic Isolator Kit
A fully automatic dual battery kit ideal for use on large 4WD vehicles wishing to run double or triple battery systems.
SPECIFICATIONS  
 
Product details   MOUNTING Surface/firewall/battery side
PART NO. DBC150K   CURRENT DRAW Charging 500mA (standby 30mA)
VOLTAGE 12V   SURGE PROTECTION Built-in
CHARGING CURRENT 125A Continuous, 150A Peak   APPROVALS EMC
CUT-IN VOLTAGE 13.4V   L.E.D CHARGE INDICATION
CUT-OUT VOLTAGE 12.8V     ON FLASH
CUT-OUT DELAY 60 seconds   RED LIGHT Power on Aux battery fault
Minimum operating
Voltage		 One battery above 7.5V   BLUE LIGHT Charging Over-current
CHARGE TYPE Parallel   GREEN LIGHT
 		 Override on
 		 Over-current
 
CONTROL MCU  
           
 
 
KIT COMPRISES   DOCUMENTS
• Electronic isolator (150A: P/No. DBC150)                  
• 6m main cable (4 B&S) & 60cm aux earth cable (3 B&S)
• Fused distribution terminal, fuses, lugs, heat shrink & cable ties

 

BATTERY CHARGER 12V 16AMP 6 STAGE SWITCH MODE PROJECTOR PC1600  

12V AUTOMATIC 16A 6 STAGE BATTERY CHARGER

PART NO PC1600

Fully adjustable, the PC1600 is the ideal all-rounder for the home professional.

FEATURES

Adjustable Output
Suitable for a wide range of different size batteries

Calcium Mode
Adjusts the charging profile to suit calcium batteries

Rejuvenation Mode
Revitalises tired batteries, increasing battery life and performance (subject to battery condition)

Side Mounting Wings
Optional mounting wings for permanent installation

Safer Charging

Spark free and polarity protected

TYPE

6 Stage Battery Charger

INPUT

240VAC, 50Hz, 432W

OUTPUT

12V

OUTPUT CURRENT

2, 4, 8, 16A

MINIMUM START VOLTAGE

3.0V

BACK DRAIN

1mA

APPROVALS

Electrical Safety, EMC
L.E.D. CHARGE INDICATION

BLUE LIGHT ON

Bulk and absorption charging

GREEN LIGHT ON

Fully charged and maintaining,
no need to turn off

AMBER LIGHT ON

Rejuvenation process occurring

RED LIGHT ON

Indicates faulty battery
BATTERY CHARGE TIMES

PC1600

VOLTAGE

BATTERY SIZE

CHARGE TIME

AUTOMOTIVE

12V

80–1900CCA

7–24 hrs

MARINE

12V

110–2700MCA

7–24 hrs

DEEP CYCLE

12V

14–320Ah

7–24 hrs

PROJECTA DT910 BATTERY TESTER CURRENT DIGITAL CLAMP METER

SPECIFICATIONS  
 
PRODUCT DETAILS   DIODE TEST Screen display forward Voltage drop
PART NO. DT910   FREQUENCY 0–1 MHz
RANGE Auto scale   DUTY CYCLE 1–99%
POLARITY Auto indication (-)   ACCURACY < ± 1.0% full scale reading
VOLTAGE DCV 600V; ACV 600V BATTERY 1.5V dry cell (AAA x 2)
CURRENT DCA 400A; ACA 400A   LOW BATTERY WARNING 2.3V
MAXIMUM CONDUCTOR SIZE Cable 38mm diameter
Bus bar 41mm x 30mm		   INSULATION CAT II
RESISTANCE 0–4 MOhm   SIZE 219mm x 84mm x 42mm
CONTINUITY Buzzer   WEIGHT 540g
TEMPERATURE MEASUREMENT 0oC - 250oC (300oC for short periods)   CAPACITANCE 5nf - 200µF
NON-CONTACT VOLTAGE DETECTION 240V AC      
               
 
Weight1.5010.01.32.72.300.4
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 10.0 kg
Weight 1.3 kg
Weight 2.7 kg
Weight 2.30 kg
Weight 0.4 kg

Related products

Sctruckspares
South Coast Truck Sales & Spares is the largest truck parts and accessory supplier on the South Coast of NSW located in Unanderra one hour south of Sydney.

Quick Links

FIND US

Cnr Princes Hwy
& Orangegrove Ave
(enter from Princes Hwy)
Unanderra NSW 2526

Get directions

Contact Us
Mon-Fri: 8am - 4pmSat: 8am - 12pm
South Coast Truck Sales & Spares Pty Ltd. © 2022. All rights reserved.

This will close in 0 seconds

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X