Mon-Fri: 8am - 4pm, Sat: 8am - 12pm

Choose Language

Save $193
WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

$700.00

Add to wishlist
SKU: HDBC20 Categories: , ,
PROJECTA

Description

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

Multi Voltage Operation 
Suitable for charging 6, 12 or 24 Volt batteries. 
Manual Charge 
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge 
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. 
0-14 Hour Timer 
Automatically turns the battery charger off after set time. Can be set at 60 min intervals. 
Engine Start 
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display 
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. 
Thermal Overload/Polarity Protection 
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. 
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.

SPECIFICATIONS
PART NO. HDBC20
TYPE Manual and Automatic
INPUT 240V, 50Hz, 300W
OUTPUT 12,000mA (20A RMS*) at 6.0V, 
12,000mA (20A RMS*) at 12.0V, 
7,700mA (13A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off 
50A at 3.6V / 50A at 7.2V / 25A at 14.4V
CHARGE CONTROL  Cut out: 7.1V 14.2V 28.4V 
Cut in: 6.7V 13.4V 26.8V 
Start: 0.0V 0.0V 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON  Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON  Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE  CHARGE TIME 
AUTOMOTIVE 6, 12,24V 450-1200CCA 6-15 hrs
MARINE 6, 12,24V  600-1400MCA 8-18 hrs
DEEP CYCLE 6, 12,24V  65-160Ah  8-18 hrs

 

Brand

PROJECTA

Additional information

Weight 10.0 kg
Shipping to Please provide the delivery address details.
Product WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20
Total weight 1 × 10.00 kg = 10.00 kg
Price -

Quick Comparison

SettingsWORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20 removeSAFE CASE SMALL 210MM KINCROME 51010 removeDIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035 removeTRADEQUIP 7019 DRILL PEDESTAL - 3/4HP removeSPANNER SET GEAR 3 PIECE 12-IN-3 REVERSE KINCROME K3007 removeGREASE NIPPLE SET METRIC TOLDEO 305267 remove
ImageWORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20
SKUHDBC2051010K80357019K3007305267
Rating
Price $636.36 $59.09 $118.18 $324.55 $70.00 $90.00
Stock

Out of stock

2 in stock

2 in stock

1 in stock

1 in stock

2 in stock

AvailabilityOut of stock2 in stock2 in stock1 in stock1 in stock2 in stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionSAFE CASE SMALL 210MM KINCROME 51010DIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035SPANNER SET GEAR 3 PIECE 12-IN-3 REVERSE KINCROME K3007
Content

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

Multi Voltage Operation 
Suitable for charging 6, 12 or 24 Volt batteries. 
Manual Charge 
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge 
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. 
0-14 Hour Timer 
Automatically turns the battery charger off after set time. Can be set at 60 min intervals. 
Engine Start 
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display 
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. 
Thermal Overload/Polarity Protection 
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. 
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.

SPECIFICATIONS
PART NO. HDBC20
TYPE Manual and Automatic
INPUT 240V, 50Hz, 300W
OUTPUT 12,000mA (20A RMS*) at 6.0V, 
12,000mA (20A RMS*) at 12.0V, 
7,700mA (13A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off 
50A at 3.6V / 50A at 7.2V / 25A at 14.4V
CHARGE CONTROL  Cut out: 7.1V 14.2V 28.4V 
Cut in: 6.7V 13.4V 26.8V 
Start: 0.0V 0.0V 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON  Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON  Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE  CHARGE TIME 
AUTOMOTIVE 6, 12,24V 450-1200CCA 6-15 hrs
MARINE 6, 12,24V  600-1400MCA 8-18 hrs
DEEP CYCLE 6, 12,24V  65-160Ah  8-18 hrs

 

SAFE CASE SMALL 210MM KINCROME 51010
Protect your valuables against the elements! • Manufactured from ultra high impact structural polymer • Includes purge valve for quick equalization after changes in atmospheric pressure • Sealed for moisture protection. • Valuables can fit into high density foam insert, for total protection against elements, impact, vibration or shock • Ideal for Photographic & Electronic Equipment, Sporting Goods • Ideal for Marine, 4WD, Camping & Job-site use
FEATURES
Safe Cases are: • Water Resistant • Vibration Proof • Dust Proof • Shock Proof • Light Weight • Stackable • Chemical Resistant • Corrosion proof • Super Strong Latches • Marine Yellow Colour • Fully Lockable for Added Security
TECHNICAL SPECIFICATIONS
Measurements 210 x 167 x 90MM
Internal Measurements 186 x 123 x 75MM
Material Ultra High Impact Structural Polymer
Weather resistance IP67
DIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035
The Kincrome 1/2" Square Drive Digital Torque Adapter converts any standard 1/2" Square Drive ratchet into an accurate digital torque wrench. Simply set the desired torque, plug in a ratchet and socket and tighten the fastener until the digital display and audible tone indicate you’ve reached your target torque. You can also use it to calibrate an existing torque wrench. Display modes include Peak, which displays and stores the max torque applied, and Trace, which shows real-time torque as it is applied.
TECHNICAL SPECIFICATIONS
Measurements 70 x 40 x 50MM
Weight 183G
 

Description

240v / 550w / 3/4 HP
No Volt Release Safety Switch
With Engineers Type Coolant Table Tray
Chuck: 16mm
Drilling Capacity (Steel): 28mm
Spindle Speed: 220-3480rpm / 16 speeds
Spindle Taper / Travel: MT2 / 80mm
Table Size: 305 x 305mm
Spindle to Table / Base: 780mm / 1230mm
Overall Height: 1610mm
Net Weight: 67kg

 

SPANNER SET GEAR 3 PIECE 12-IN-3 REVERSE KINCROME K3007

GREASE NIPPLE SET METRIC TOLDEO 305267

  • Made from EN-1A steel (plated yellow zinc), heat treated
  • Manufactured to QS9000 quality standards

ITEM CONTENTS

Name Qty
Grease Nipple - 6mm x 1 Straight 30
Grease Nipple - 6mm x 90° Angle 20
Grease Nipple - 8mm x 1 Straight 20
Grease Nipple - 8mm x 90° Angle 20
Grease Nipple - 10mm x 1 Straight 20
Grease Nipple - 10mm x 90° Angle 10
Weight10.0.90.4020.0.600.75
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.0 kg
Weight .90 kg
Weight .40 kg
Weight 20.0 kg
Weight .60 kg
Weight 0.75 kg

Related products

Sctruckspares
South Coast Truck Sales & Spares is the largest truck parts and accessory supplier on the South Coast of NSW located in Unanderra one hour south of Sydney.

Quick Links

FIND US

Cnr Princes Hwy
& Orangegrove Ave
(enter from Princes Hwy)
Unanderra NSW 2526

Get directions

Contact Us
Mon-Fri: 8am - 4pmSat: 8am - 12pm
South Coast Truck Sales & Spares Pty Ltd. © 2022. All rights reserved.

This will close in 0 seconds

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X