Mon-Fri: 8am - 4pm, Sat: 8am - 12pm

Choose Language

South Coast Truck Sales & SparesShopElectricalProjectaJumpstartersJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
Save $48

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

$250.00

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

SKU: IS1220 Categories: ,

Description

JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

INTELLI-START 12V 1200A LITHIUM EMERGENCY JUMP STARTER AND POWER BANK

PART NO IS1220

1200A PEAK AMPS, 400A CLAMP POWER

This powerful and compact lithium jump starter is capable of starting most petrol engines up to 7.0L* and diesel vehicles up to 4.5 litres.

OVERVIEW

  • Rapid Recharge Technology (RRT)
  • Lasts 4X longer* than other Jump Starters.
  • Ultra-safe Lithium Iron Phosphate (LiFePOâ‚„) battery
  • 90% lighter than equivalent lead acid Jump Starter
  • Built in L.E.D flood light
  • Power bank functionality

INSTRUCTIONAL MANUAL

> Download PDF

SPECIFICATIONS

PART NO

IS1220

APPLICATION

Emergency

OUTPUT

12V

EMERGENCY JUMPSTARTS
(With a flat vehicle battery)

68 (Petrol) 34 (Diesel)

SUITABLE FOR VEHICLES

Up to 7.0L petrol and up to 4.5L diesel

VEHICLE VOLTAGE RANGE

0 – 15.0V

USB OUTPUT

USB OUTPUT

2.1A, 5.0V

USB LOW VOLTAGE DISCONNECT

Battery voltage at 10.5

BATTERY

BATTERY CAPACITY

12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V

BATTERY CHEMISTRY

Lithium Iron Phosphate (LiFePO4)

THEORETICAL SHORT CIRUIT CURRENT

1200A

CLAMP OUTPUT

400A

TOTAL BATTERY CYCLES

1800

JUMP STARTER LEADS

LENGTH

Positive 31.0cm, negative 27.0cm

CABLE

8mm² 8(AWG)

POLARITY PROTECTION

MCU controlled with Electronic Switch Smart Module

RECHARGING

CABLE

1m long USB to Micro USB

MICRO USB CHARGING PORT

2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied)

12V DC CHARGING

12V to 5V 2.1Amp USB charger (provided)

RECHARGE TIME

8 hours

JUMP STARTER

WEIGHT

0.80 kg

DIMENSIONS

H: 50mm L: 197mm W: 95mm

OPERATING TEMPERATURE

-20°C to 60°C

STORAGE TEMPERATURE

-0°C to 45°C

INGRESS PROTECTION

IP53 (rain proof) with covers over the ports

Brand

PROJECTA

Additional information

Weight 1.50 kg
Shipping to Please provide the delivery address details.
Product JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
Total weight 1 × 1.50 kg = 1.50 kg
Price -

Quick Comparison

SettingsJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220 removeWORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20 removeINVERTER 24V 2000W MODIFIED SINE WAVE PROJECTA IMW2000-24 removeBATTERY CHARGER 12V 7AMP INTELLI CHARGE 7 STAGE PROJECTA IC700W removeRELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100 removePROJECTA VSR100K DUAL BATTERY SYSTEM 12V 100AMP VSR remove
ImageJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220JUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
SKUIS1220HDBC20IMW000.24IC700WVSR100VSR100K
Rating
Price $227.27 $636.36 $627.27 $218.18 $81.82 $122.73
Stock

6 in stock

Out of stock

Out of stock

1 in stock

1 in stock

4 in stock

Availability6 in stockOut of stockOut of stock1 in stock1 in stock4 in stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

DescriptionJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220
ContentJUMP STARTER LITHIUM 1200 AMP PROJECTA IS1220

INTELLI-START 12V 1200A LITHIUM EMERGENCY JUMP STARTER AND POWER BANK

PART NO IS1220 1200A PEAK AMPS, 400A CLAMP POWER This powerful and compact lithium jump starter is capable of starting most petrol engines up to 7.0L* and diesel vehicles up to 4.5 litres. OVERVIEW
  • Rapid Recharge Technology (RRT)
  • Lasts 4X longer* than other Jump Starters.
  • Ultra-safe Lithium Iron Phosphate (LiFePOâ‚„) battery
  • 90% lighter than equivalent lead acid Jump Starter
  • Built in L.E.D flood light
  • Power bank functionality
INSTRUCTIONAL MANUAL > Download PDF
SPECIFICATIONS

PART NO

IS1220

APPLICATION

Emergency

OUTPUT

12V

EMERGENCY JUMPSTARTS
(With a flat vehicle battery)

68 (Petrol) 34 (Diesel)

SUITABLE FOR VEHICLES

Up to 7.0L petrol and up to 4.5L diesel

VEHICLE VOLTAGE RANGE

0 – 15.0V

USB OUTPUT

USB OUTPUT

2.1A, 5.0V

USB LOW VOLTAGE DISCONNECT

Battery voltage at 10.5

BATTERY

BATTERY CAPACITY

12,000mAhr at 3.2V, 38.48wHr at 3.2V, 3.0Ahr at 12.8V

BATTERY CHEMISTRY

Lithium Iron Phosphate (LiFePO4)

THEORETICAL SHORT CIRUIT CURRENT

1200A

CLAMP OUTPUT

400A

TOTAL BATTERY CYCLES

1800

JUMP STARTER LEADS

LENGTH

Positive 31.0cm, negative 27.0cm

CABLE

8mm² 8(AWG)

POLARITY PROTECTION

MCU controlled with Electronic Switch Smart Module

RECHARGING

CABLE

1m long USB to Micro USB

MICRO USB CHARGING PORT

2.1Amp micro USB charging port. 3rd party 10W 240VAC USB adaptors can be used (not supplied)

12V DC CHARGING

12V to 5V 2.1Amp USB charger (provided)

RECHARGE TIME

8 hours

JUMP STARTER

WEIGHT

0.80 kg

DIMENSIONS

H: 50mm L: 197mm W: 95mm

OPERATING TEMPERATURE

-20°C to 60°C

STORAGE TEMPERATURE

-0°C to 45°C

INGRESS PROTECTION

IP53 (rain proof) with covers over the ports

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

Multi Voltage Operation 
Suitable for charging 6, 12 or 24 Volt batteries. 
Manual Charge 
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge 
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. 
0-14 Hour Timer 
Automatically turns the battery charger off after set time. Can be set at 60 min intervals. 
Engine Start 
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display 
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. 
Thermal Overload/Polarity Protection 
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. 
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.

SPECIFICATIONS

PART NO. HDBC20
TYPE Manual and Automatic
INPUT 240V, 50Hz, 300W
OUTPUT 12,000mA (20A RMS*) at 6.0V, 
12,000mA (20A RMS*) at 12.0V, 
7,700mA (13A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off 
50A at 3.6V / 50A at 7.2V / 25A at 14.4V
CHARGE CONTROL  Cut out: 7.1V 14.2V 28.4V 
Cut in: 6.7V 13.4V 26.8V 
Start: 0.0V 0.0V 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON  Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON  Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE  CHARGE TIME 
AUTOMOTIVE 6, 12,24V 450-1200CCA 6-15 hrs
MARINE 6, 12,24V  600-1400MCA 8-18 hrs
DEEP CYCLE 6, 12,24V  65-160Ah  8-18 hrs

 

24V 2000W MODIFIED SINE WAVE INVERTER

PART NO IMW2000-24

The perfect inverter to run the comforts of home when on long
and demanding road trips.

FEATURES

Battery cable
1100mm 25mm2 battery cable

Twin power sockets
AS/NZS approved 240V sockets. Inverter designed to Australian standard AS4763

L.E.D indicators
Power and fault lights with audible alarm if problem is detected

Efficient design
Temperature controlled automatic cooling fan

Mounting flange
Convenient and robust mounting points

Range features and application guide

SPECIFICATIONS

PART NO

IMW2000-24

INPUT

24VDC, 120A Max

NO LOAD CURRENT DRAW

0.6A

OUTPUT

230/240VAC, 50Hz (Modified Sine)

OUTPUT POWER

2000W Continuous (4000W Peak)

INVERTER CLASSIFICATION

Equipotentially Bonded (EPB)

EFFICIENCY

85–90%

LOW BATTERY ALARM

21.0 Volt

SHUTDOWN

20.0 Volt (±0.2V)

COOLING FAN

Automatic temperature controlled

THERMAL SHUTDOWN

65°C (±5°C)

FUSE

12 x 10A

IDEAL BATTERY SIZE

50–200Ah

MINIMUM BATTERY SIZE

50Ah, 400CCA

RUN TIME WITH 2000W ON 85Ah BATTERY

5 minutes

RUN TIME WITH 100W GLOBE ON 50Ah BATTERY

7 hours

WARNING ALARM

LED & Audible alarm indicates a fault

APPROVALS

Electrical Safety, EMC

INSTRUCTION MANUAL

Download PDF

Type 7 stage
Input 240VAC, 50Hz, 216W
Output 7A at 12V
Minimum start voltage 2.5V
Back drain 1mA
Approvals Electrical Safety, EMC
Charge voltage 14.1V (GEL), 14.4V (AGM), 14.7V (WET), 16.0V (Calcium)

L.E.D Charge Indication
Red light on Power on
Blue light on Charging
Green light on Fully charged and maintaining, no need to turn the charger off

Battery Charge Times
Voltage Battery size Charge time
Automotive 12V 300-800CCA 6-12 hrs
Marine 12V 350-900MCA 8-15 hrs
Deep cycle 12V 50-140Ah 6-20 hrs

Offering all the features of its standard 7A counterpart, this sophisticated and compact charger is

supplied with protective rubber moulded end caps for enhanced durability, ideal for the rigours of workshop enviroments.

Weight1.5010.07.61.30.351.7
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.50 kg
Weight 10.0 kg
Weight 7.6 kg
Weight 1.3 kg
Weight 0.35 kg
Weight 1.7 kg
Sctruckspares
South Coast Truck Sales & Spares is the largest truck parts and accessory supplier on the South Coast of NSW located in Unanderra one hour south of Sydney.
FIND US

Cnr Princes Hwy
& Orangegrove Ave
(enter from Princes Hwy)
Unanderra NSW 2526

Get directions

Contact Us
Mon-Fri: 8am - 4pmSat: 8am - 12pm
South Coast Truck Sales & Spares Pty Ltd. © 2022. All rights reserved.

This will close in 0 seconds

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X