ATTENTION! This website is closed for business and no longer taking orders or product enquiries. The website is for sale, if interested, please email us at: sales@sctruckspares.com.au

Mon-Fri: 8am - 4pm, Sat: 8am - 12pm

Choose Language

South Coast Truck Sales & SparesShopElectricalProjectaRELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100
Save $25
Awaiting product image

RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100

$90.00

Add to wishlist
SKU: VSR100 Categories: ,
PROJECTA

Description

Brand

PROJECTA

Additional information

Weight 0.35 kg
Shipping to Please provide the delivery address details.
Product RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100
Total weight 1 × 0.35 kg = 0.35 kg
Price -

Quick Comparison

SettingsRELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100 removeWORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20 removePROJECTA IMW300 INVERTER 12V 300W removeBATTERY TESTER CURRENT DIGITAL CLAMP METERPROJECTA DT910 removeBATTERY CHARGER 12V 7AMP INTELLI CHARGE 7 STAGE PROJECTA IC700W removePROJECTA DBC100K DUAL BATTERY KIT 12V 100AMP ELECTRONIC ISOLATOR KIT remove
ImageRELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100RELAY VOLTAGE SENSITIVE 12V 100AMP PROJECTA VSR100
SKUVSR100HDBC20IMW300DT910IC700WDBC100K
Rating
Price $81.82 $636.36 $100.00 $140.91 $218.18 $168.18
Stock

1 in stock

Out of stock

1 in stock

2 in stock

1 in stock

2 in stock

Availability1 in stockOut of stock1 in stock2 in stock1 in stock2 in stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
Content

WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20

Multi Voltage Operation 
Suitable for charging 6, 12 or 24 Volt batteries. 
Manual Charge 
When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell.
Automatic Charge 
Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. 
0-14 Hour Timer 
Automatically turns the battery charger off after set time. Can be set at 60 min intervals. 
Engine Start 
If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine.
L.E.D Voltage/Amp Display 
A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. 
Thermal Overload/Polarity Protection 
Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. 
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output.

SPECIFICATIONS
PART NO. HDBC20
TYPE Manual and Automatic
INPUT 240V, 50Hz, 300W
OUTPUT 12,000mA (20A RMS*) at 6.0V, 
12,000mA (20A RMS*) at 12.0V, 
7,700mA (13A RMS*) at 24.0V
ENGINE START 3 cycles 5 min on, 20 min off 
50A at 3.6V / 50A at 7.2V / 25A at 14.4V
CHARGE CONTROL  Cut out: 7.1V 14.2V 28.4V 
Cut in: 6.7V 13.4V 26.8V 
Start: 0.0V 0.0V 0.0V
APPROVALS Electrical Safety, EMC
L.E.D CHARGE INDICATION
RED LIGHT ON Overload
SECOND RED LIGHT ON  Power on
SECOND RED LIGHT FLASHING Reverse connection
AMBER LIGHT ON  Charging
GREEN LIGHT ON Fully charged
L.E.D SCREEN Voltage/current
BATTERY CHARGE TIMES
HDBC20 VOLTAGE BATTERY SIZE  CHARGE TIME 
AUTOMOTIVE 6, 12,24V 450-1200CCA 6-15 hrs
MARINE 6, 12,24V  600-1400MCA 8-18 hrs
DEEP CYCLE 6, 12,24V  65-160Ah  8-18 hrs

 

PROJECTA IMW300 INVERTER 12V 300W

12V 300W MODIFIED SINE WAVE INVERTER

PART NO IMW300

If you’re after the convenience of 240V power while camping, then the IM300 inverter is ideal.

FEATURES

Battery clips
900mm heavy duty battery cable with fitted battery clips for convenient connection

Approved output socket
AS/NZS approved 240V socket. Inverter designed to Australian standard AS4763

L.E.D indicators
Power and fault lights with audible alarm if problem is detected

Efficient design
Cooling fan to prevent overheating

> Range features and application guide

SPECIFICATIONS

PART NO

IMW300

INPUT

12V DC, 30A Max

NO LOAD CURRENT DRAW

0.57A

OUTPUT

230/240VAC, 50Hz (Modified Sine)

OUTPUT POWER

300W Continuous (600W Peak)

INVERTER CLASSIFICATION

Equipotentially Bonded (EPB)

EFFICIENCY

85–90%

LOW BATTERY ALARM

10.5 Volt

SHUTDOWN

10.0 Volt (±0.2V)

COOLING FAN

Constant run

THERMAL SHUTDOWN

65°C (±5°C)

FUSE

1 x 40A

IDEAL BATTERY SIZE

50–70Ah

MINIMUM BATTERY SIZE

24Ah, 200CCA

RUN TIME WITH 300W ON 24Ah BATTERY

40 minutes

RUN TIME WITH 100W GLOBE ON 24Ah BATTERY

2 hours

WARNING ALARM

LED & Audible alarm indicates a fault

APPROVALS

Electrical Safety, EMC

INSTRUCTION MANUAL

> Download PDF

PROJECTA DT910 BATTERY TESTER CURRENT DIGITAL CLAMP METER

SPECIFICATIONS  
 
PRODUCT DETAILS   DIODE TEST Screen display forward Voltage drop
PART NO. DT910   FREQUENCY 0–1 MHz
RANGE Auto scale   DUTY CYCLE 1–99%
POLARITY Auto indication (-)   ACCURACY < ± 1.0% full scale reading
VOLTAGE DCV 600V; ACV 600V BATTERY 1.5V dry cell (AAA x 2)
CURRENT DCA 400A; ACA 400A   LOW BATTERY WARNING 2.3V
MAXIMUM CONDUCTOR SIZE Cable 38mm diameter
Bus bar 41mm x 30mm		   INSULATION CAT II
RESISTANCE 0–4 MOhm   SIZE 219mm x 84mm x 42mm
CONTINUITY Buzzer   WEIGHT 540g
TEMPERATURE MEASUREMENT 0oC - 250oC (300oC for short periods)   CAPACITANCE 5nf - 200µF
NON-CONTACT VOLTAGE DETECTION 240V AC      
               
 

Type 7 stage
Input 240VAC, 50Hz, 216W
Output 7A at 12V
Minimum start voltage 2.5V
Back drain 1mA
Approvals Electrical Safety, EMC
Charge voltage 14.1V (GEL), 14.4V (AGM), 14.7V (WET), 16.0V (Calcium)

L.E.D Charge Indication
Red light on Power on
Blue light on Charging
Green light on Fully charged and maintaining, no need to turn the charger off

Battery Charge Times
Voltage Battery size Charge time
Automotive 12V 300-800CCA 6-12 hrs
Marine 12V 350-900MCA 8-15 hrs
Deep cycle 12V 50-140Ah 6-20 hrs

Offering all the features of its standard 7A counterpart, this sophisticated and compact charger is

supplied with protective rubber moulded end caps for enhanced durability, ideal for the rigours of workshop enviroments.

PROJECTA DBC100K DUAL BATTERY KIT 12V 100AMP ELECTRONIC ISOLATOR KIT

12V 100A ELECTRONIC ISOLATOR KIT

PART NO DBC100K

A fully automatic dual battery kit suitable for any mid-sized vehicle with an auxiliary battery.

Kit comprises:  Electronic isolator (100A: P/No. DBC100), lugs, terminals, heat shrink & cable ties, 4m main cable & 60cm aux earth cable (6 B&S) bracket, auxiliary battery terminals (2 x pos, 1 x neg)

FEATURES

Priority charging
Ensures main battery is charged before connecting to auxiliary

Comprehensive kit
Includes everything for an easy and professional installation

Manual override
Allows batteries to be manually paralleled for jumpstarting

Quality battery terminals
Solid brass battery terminals with quick release wingnut bolts allowing multiple cable connections

Vehicle protection
Built-in over current and surge protection

> Range features

SPECIFICATIONS

PART NO

DBC100K

VOLTAGE

12V

CHARGING CURRENT

75A Continuous, 100A Peak

CUT-IN VOLTAGE

13.4V

CUT-OUT VOLTAGE

12.8V

CUT-OUT DELAY

60 seconds

MINIMUM OPERATING VOLTAGE

One battery above 7.5V

CHARGE TYPE

Parallel

CONTROL

MCU

MOUNTING

Surface/firewall battery side

CURRENT DRAW

Charging 500mA (standby 30mA)

SURGE PROTECTION

Built-in

APPROVALS

EMC

INSTRUCTION MANUAL

> Download PDF

Projecta DBC100K 100 Amp Dual Battery Isolator Kit With Push Button Override.

A fully automatic dual battery kit suitable for any mid-sized vehicle with an auxiliary battery.

FEATURES
Easy to Install - The electronic isolator does not require any changes to the vehicles existing wiring system. It can be fitted to all 12V vehicle types.
Priority Charging for Starting Battery - Ensures that the main battery is fully charged before connecting the auxiliary battery in parallel with the main.
Manual Override - If the starting battery goes flat and the auxiliary battery is charged, the electronic isolator allows the batteries to be manually paralleled to jump start the vehicle.
Over Current Protection - Features built in over current protection that protects the isolator. Over current is most likely to occur if there is a short circuit in the wiring.
Surge Protection - Provides surge protection for vehicles with electronic ignition systems.

 

INCLUDES
Electronic isolator (100A: P/No. DBC100).
6m Cable & 60cm aux earth cable, auxiliary battery.
Terminals, fuses, lugs, heat shrink & cable ties.


Weight0.3510.01.20.41.31.5
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.35 kg
Weight 10.0 kg
Weight 1.2 kg
Weight 0.4 kg
Weight 1.3 kg
Weight 1.5 kg

Related products

Sctruckspares
South Coast Truck Sales & Spares is the largest truck parts and accessory supplier on the South Coast of NSW located in Unanderra one hour south of Sydney.

Quick Links

FIND US

Cnr Princes Hwy
& Orangegrove Ave
(enter from Princes Hwy)
Unanderra NSW 2526

Get directions

Contact Us
Mon-Fri: 8am - 4pmSat: 8am - 12pm
South Coast Truck Sales & Spares Pty Ltd. © 2022. All rights reserved.

This will close in 0 seconds

Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
  • Attributes
  • Custom attributes
  • Custom fields
Click outside to hide the comparison bar
Compare
Compare ×
Let's Compare! Continue shopping
X