WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20
$893.00
$700.00
Description
WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20
Multi Voltage Operation Suitable for charging 6, 12 or 24 Volt batteries. |
Manual Charge When used by experienced operators it can be used to deliver an equalization charge to balance the voltage in the battery's cell. |
Automatic Charge Leave connected to the battery without the risk of overcharging. The charger automatically controls its output when the battery is full, and maintains it in a fully charged state. |
0-14 Hour Timer Automatically turns the battery charger off after set time. Can be set at 60 min intervals. |
Engine Start If you need to get going and the battery is flat then the engine start will help you out. Connect the charger to the battery, set it to engine start mode for 5 minutes, then start your engine. |
L.E.D Voltage/Amp Display A volt meter determines the battery charge level while the Amp meter displays how much power is being delivered into the battery. |
Thermal Overload/Polarity Protection Prevents the output leads from sparking due to accidental reverse connection or short circuit, increasing safety. |
* The term "20A" as opposed to "12,000mA" is an Amps RMS rating used as an industry reference and not the actual DC output. |
|
Brand
PROJECTA
Additional information
Weight | 10.0 kg |
---|
Quick Comparison
Settings | WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20 remove | TRUCK BOX ALUM CHECK 1150MM PROPELLER BRIGHT ONE ELEVEN ALP1150 remove | DIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035 remove | GREASE NIPPLE KIT SS ST MET/ IMP 170 PIECES CHAMPION CA1808 remove | TRADEQUIP 7019 DRILL PEDESTAL - 3/4HP remove | SP TOOLS SP-1190P Impact wrench 1 DR 1800FT.LB pistol grip remove | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Image | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
SKU | HDBC20 | ALP1150 | K8035 | CA1808 | 7019 | SP.1190P | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Rating | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Price | $359.09 | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Stock | Out of stock | 1 in stock | 2 in stock | 1 in stock | 1 in stock | 1 in stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Availability | Out of stock | 1 in stock | 2 in stock | 1 in stock | 1 in stock | 1 in stock | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Add to cart | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Description | DIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035 | GREASE NIPPLE KIT SS ST MET/ IMP 170 PIECES CHAMPION CA1808 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Content | WORKSHOP BATTERY CHARGER 6/12/24V 12000MA PROJECTA HDBC20
| TRUCK BOX ALUM CHECK 1150MM PROPELLER BRIGHT ONE ELEVEN ALP1150
| DIGITAL TORQUE ADAPTOR 1/2" DRIVE KINCROME K8035
The Kincrome 1/2" Square Drive Digital Torque Adapter converts any standard 1/2" Square Drive ratchet into an accurate digital torque wrench. Simply set the desired torque, plug in a ratchet and socket and tighten the fastener until the digital display and audible tone indicate you’ve reached your target torque. You can also use it to calibrate an existing torque wrench. Display modes include Peak, which displays and stores the max torque applied, and Trace, which shows real-time torque as it is applied.
TECHNICAL SPECIFICATIONS
| GREASE NIPPLE KIT SS ST MET/ IMP 170 PIECES CHAMPION CA1808 |
240v / 550w / 3/4 HP
| The single dog clutch hammer mechanism provides 1 blow per revolution. With only three moving parts, this impact mechanism is extremely powerful and very durable. Excellent for use in heavy duty industrial applications. | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Weight | 10.0 | 22.0 | .40 | 130 | 20.0 | 5.0 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Additional information |
|
|
|
|
|
|
Related products
-
-19%